Description
|
Bidirectional radio receiver The actuator reports its position and status information to the operating device. |
|
Highlight: Sensitive obstacle detection in DOWN direction with automatic reversal when using use of flexible suspension springs or rigid suspension springs shaft connectors | |||
|
Your benefit: Automatic detection of the end positions when using flexible suspension springs or rigid shaft connectors |
|
Blocking detection in OPEN direction (freeze protection) | ||
| On-site operation with |
|
Freeze protection at the top with automatic curtain length equalisation can be additionally activated | ||
|
Simple programming of the end positions With and without fixed stops |
| Automatic increase in contact pressure for anti-lift devices | ||
| Intermediate positions can be |
| Fly screen protection function | ||
|
End position status indicator (ESI) signals missing end positions |
|
Parallel switchable Without cut-off relay | ||
|
Intelligent installation management Enables end position corrections |
| Top soft stop | ||
|
Dynamic torque adjustment to changes in the roller shutter element |
| Motor head can be overwound | ||
| Motor protected against overheating |
| Suitable for right and left-hand installation | ||
| Compatible with many control units from the Centronic II series |
| Programming of 2 freely |
Field of application
| ||
Specifications
| Article number | Designation | Nm | U/min | L1 | L2 | L3 | ØC | Power in watts |
| 149 0138 01 | R8-17-C01 PLUS | 8 | 17 | 471 | 511 | 528 | 45 | 100 |
| 149 0138 02 | R12-17-C01 PLUS | 12 | 17 | 471 | 511 | 528 | 45 | 110 |
| 149 0138 03 | R20-17-C01 PLUS | 20 | 17 | 500 | 540 | 557 | 45 | 160 |
| 149 0138 04 | R30-17-C01 PLUS | 30 | 17 | 524 | 564 | 581 | 45 | 205 |
| 149 0138 05 | R40-17-C01 PLUS | 40 | 17 | 539 | 579 | 596 | 45 | 260 |
- Operating voltage: 230V
- End position adjustment: Electronic
- Output drive: 60mm 8-edge
- Blocking detection: with blocking detection
- Obstacle detection: with obstacle detection
- Operating mode: Radio
- Radio protocol: "Centronic" from Becker
- Design: Ø50mm
- Product group: Tubular motors Becker
- Strength: 40Nm8Nm12Nm20Nm30Nm
- Revolutions/min.: 17 rpm.
- Parallel connection: suitable for parallel connection
- Additional Description: with electronic limit switches
PDF
Instructions
