Description
Electronic end position adjustment with encoder, wired
This motor can be used with all roller shutters.
Simple installation
Fit the motor, switch on the power and... off you go! No adjustment required.
Continuous self-learning
Optimization of the end positions thanks to constant reading of the torque as the roller shutter moves
Specific functions:
- Automatic adjustment of the end positions.
- Anti-freeze protection and obstacle detection in up and down movement.
- Possibility of direct parallel connection.
- Release in each end position.
- Obstacle detection in both directions with return release.
The accessories fixed shaft connector and stopper or angled end rail are required for proper functioning.
Field of application
| ||
Specifications
| Article number | Designation | Nm | Rpm | L1 | ØC | Power in watts |
| 149 0148 01 | Plug&Play Ø45mm - 6/17 | 6 | 17 | 496 | 45 | 110 |
| 149 0148 02 | Plug&Play Ø45mm - 10/17 | 10 | 17 | 496 | 45 | 135 |
| 149 0148 03 | Plug&Play Ø45mm - 15/17 | 15 | 17 | 546 | 45 | 170 |
| 149 0148 04 | Plug&Play Ø45mm - 25/17 | 25 | 17 | 546 | 45 | 225 |
- Operating voltage: 230V
- End position adjustment: Electronic
- Output drive: 60mm 8-edge
- Blocking detection: with blocking detection
- Obstacle detection: with obstacle detection
- Operating mode: Switches
- Special features: "Plug & Play" installation
- Design: Ø50mm
- Product group: Tubular motors Cherubini
- Strength: 10Nm15Nm25Nm6Nm
- Revolutions/min.: 17 rpm.
- Parallel connection: suitable for parallel connection
- Additional Description: with electronic limit switches
PDF
Anleitung
