Description
Electronic end position adjustment with encoder, wired
Suitable for operating single-piece roller shutters for indoor and outdoor areas, roller blinds and screens.
Simple installation
Fit the motor, switch on the power and... off you go! With fixed stops, the end position is set automatically.
Versatile
Without fixed stops, the end positions can be set very easily with a simple button sequence.
NO SPECIAL ADJUSTMENT CABLE REQUIRED!
Specific functions:
- Automatic adjustment of the end positions.
- Frost protection and obstacle detection in upward and downward movement, with relief
- Possibility of direct parallel connection.
The accessories fixed shaft connector and stopper or angled end rail are required for proper functioning.
Field of application
|
| |
Specifications
| Article number | Designation | Nm | Rpm | L1 | ØC | Power in watts | |
| 149 0007 01 | Plug&Play Plus Ø35mm - 5/30 | 5 | 30 | 547 | 35 | 130 | |
| 149 0007 02 | Plug&Play Plus Ø35mm - 9/16 | 9 | 16 | 547 | 35 | 130 |
- Operating voltage: 230V
- End position adjustment: Electronic
- Output drive: 40mm 8-edge
- Blocking detection: with blocking detection
- Obstacle detection: with obstacle detection
- Operating mode: Emergency hand crankSwitches
- Special features: "Plug & Play" installation
- Design: Ø40mm
- Product group: Tubular motors Cherubini
- Strength: 5Nm9Nm
- Revolutions/min.: 16 rpm.30 rpm.
- Parallel connection: suitable for parallel connection
- Additional Description: with electronic limit switches
