Description
Electronic end position adjustment with encoder, wired
Suitable for operating individual roller shutters for indoor and outdoor areas, roller blinds and screens.
Simple installation
Fit the motor, switch on the power and... off you go! With fixed stops, the end position is set automatically.
Versatile
Without fixed stops, the end positions can be set very easily with a simple sequence of buttons.
NO SPECIAL ADJUSTMENT CABLE REQUIRED!
Freeze protection
in the event of frozen end rails, guides and/or rods, the motor stops
Specific functions:
- Automatic or manual adjustment of the end positions.
- Obstacle detection in both directions with return travel release
- Periodic release of the end positions
- Possibility of direct parallel connection.
The accessories fixed shaft connector and stopper or angled end rail are required for proper functioning.
Field of application
|
|
|
Specifications
| Article number | Designation | Nm | >rpm | L1 | ØC | Power in watts |
| 149 0088 01 | Plug&Play Plus Ø45mm - 6/17 | 6 | 17 | 546 | 45 | 110 |
| 149 0088 02 | Plug&Play Plus Ø45mm - 10/17 | 10 | 17 | 546 | 45 | 135 |
| 149 0088 03 | Plug&Play Plus Ø45mm - 15/17 | 15 | 17 | 546 | 45 | 170 |
| 149 0088 04 | Plug&Play Plus Ø45mm - 25/17 | 25 | 17 | 586 | 45 | 225 |
| 149 0088 05 | Plug&Play Plus Ø45mm - 32/17 | 32 | 17 | 586 | 45 | 250 |
| 149 0088 06 | Plug&Play Plus Ø45mm - 40/17 | 40 | 17 | 586 | 45 | 275 |
| 149 0088 07 | Plug&Play Plus Ø45mm - 50/12 | 50 | 12 | 586 | 45 | 275 |
- Operating voltage: 230V
- End position adjustment: Electronic
- Output drive: 60mm 8-edge
- Blocking detection: with blocking detection
- Obstacle detection: with obstacle detection
- Operating mode: Switches
- Special features: "Plug & Play" installation
- Design: Ø50mm
- Product group: Tubular motors Cherubini
- Strength: 10Nm15Nm25Nm32Nm40Nm50Nm6Nm
- Revolutions/min.: 12 rpm.17 rpm.
- Parallel connection: suitable for parallel connection
- Additional Description: with electronic limit switches
