Description
The VariEco M-868 / VariEco M tubular drives are suitable for roller shutters and textile sun protection (from 50 mm). As a drive from the M series in radio and non-radio versions, it is ideally suited
with a diameter of 45 mm and a length from 491 mm, it is ideal for space-saving systems. A torque of 6 to 50 Nm and, depending on the version, 10 to 35 rpm are available.
Up to a rated torque of max. 20 Nm, many of these drives are equipped with a noiseless soft brake. All drives can be installed and adjusted
easy to install and adjust. The VariEco M NHK drive is suitable for doors, roller shutters and textile sun protection and has emergency manual operation via 7 mm hexagonal and 6 mm square shafts.
Specifications
| Article number | Designation | Nm | Rpm | C | D | Power in watts | |
| 149 0070 01 | VariEco M20 NHK | 20 | 14 | 661 | 639 | 200 | |
| 149 0070 02 | VariEco M30 NHK | 30 | 14 | 651 | 629 | 200 | |
| 149 0070 03 | VariEco M40 NHK | 40 | 14 | 681 | 659 | 242 | |
| 149 0070 04 | VariEco M50 NHK | 50 | 14 | 681 | 659 | 300 |
Product overviews
- Operating voltage: 230V
- End position adjustment: Mechanical
- Output drive: 60mm 8-edge
- Blocking detection: without blocking detection
- Obstacle detection: without obstacle detection
- Operating mode: Emergency hand crankSwitches
- Special features: End position adjustment with rotary wheel
- Design: Ø50mm
- Product group: Tubular motors Elero
- Strength: 20Nm30Nm40Nm50Nm
- Revolutions/min.: 14 rpm.
- Parallel connection: not suitable for parallel connection
- Additional Description: with mechanical limit switches
PDF
Instructions
