Description
TECline tubular motor
The drive is characterized by its reliable and proven components and safe and quick installation.
Installation
Our proven SOC clip and roller bearings or the 12 mm square bearings are available for mounting. The star-shaped contour of the motor head means that existing bearings can also be used.
All standard adapter and driver sets from the SOLIDline series can be used.
Setting the end positions
No adjustment cable is required to set the end positions. Adjustment is made by turning the two independent adjustment screws for the upper and lower end positions.
You will need a 4 mm hexagon key as a tool or you can use the adjustment aid supplied.
Specifications
| Article number | Designation | Nm | Rpm | L1 | ØC | Power in watts |
| 149 0127 01 | GB45S-10/15 | 10 | 15 | 438 | 45 | 105 |
| 149 0127 02 | GB45S-20/15 | 20 | 15 | 458 | 45 | 140 |
| 149 0127 03 | GB45S-30/15 | 30 | 15 | 488 | 45 | 180 |
| 149 0127 04 | GB45S-40/15 | 40 | 15 | 518 | 45 | 220 |
| 149 0127 05 | GB45S-50/12 | 50 | 12 | 518 | 45 | 220 |
- Operating voltage: 230V
- End position adjustment: Mechanical
- Output drive: 60mm 8-edge
- Obstacle detection: without obstacle detection
- Operating mode: Switches
- Design: Ø50mm
- Product group: Geiger tubular motors
- Strength: 10Nm20Nm30Nm40Nm50Nm
- Revolutions/min.: 12 rpm.16 rpm.
- Parallel connection: not suitable for parallel connection
- Additional Description: with mechanical limit switches
