Geiger Rescue-R KIT rescue module for roller shutters

INVISIBLE RESCUERS - SO THAT HELPERS BECOME HEROES!

Sun protection in the escape route

The requirement in accordance with Section 33 of the Model Building Regulation (MBO) demands at least two independent escape routes per floor, at least one of which must comply with the regulations of the first escape route
of the first escape route.

The first escape route is a traffic route that enables people to leave a hazardous area quickly. It leads either out of a building into the open or into a secured area.
Examples of this are corridors, stairs and exits, which people use to escape to safety in the event of a fire.

In contrast to the first escape route, which is strictly regulated and clearly defined, there are countless possible solutions when designing the second escape route.
Whether you consult the MBO or other state building regulations, you will not yet find uniform regulations nationwide. For sun shading manufacturers, architects and planners
this represents a massive challenge in terms of design and implementation. This in turn can lead to conflicts. Especially if the requirements for sun shading required by fire protection
in the second escape route are not taken into account. Furthermore, aesthetic aspects, monument protection regulations, structural framework conditions and, last but not least, costs must be reconciled
Costs have to be reconciled.

Modular design - motor and gearbox with a system!

The ingenious design of the RESCUE-R can be easily integrated into all standard roller shutter boxes. All components are dimensionally designed so that only the crank
Crank has to be installed inside the building.

• Space-saving: Thanks to its modular design, the system can be integrated into all front-mounted and top-mounted boxes.
• Flexible: RESCUE-R is available for roller shutters with 60 mm octagonal shaft and 50 mm octagonal shaft.
• Maintenance-free: The motor, freewheel and gearbox require no maintenance.
• Customer-oriented: In an emergency, the roller shutter can be opened easily and quickly at the same time. The gear reduction of 4:1 makes operation child's play.

RESCUE-R kits at a glance

• SOLIDline X01 RESCUE (10 Nm): Plug & Play motor with electronic limit stop and self-learning end positions (can be switched in parallel).

• Freewheel: Solid freewheel made of extremely stable and durable plastic.

• Bevel gear: Proven components and assemblies ensure smooth operation. The gearbox is patent pending.

• Airtight spherical bearing: Prevents cold bridges and protects against draughts and condensation.

• AvantGarde c rank handle: Elegant crank handle with concealed mechanism can be discreetly integrated into the room.

Operation in the event of fire

If the roller shutter cannot be raised electrically in the event of a fire, RESCUE-R is used. Simply pull the linkage out of the bracket, push the sleeve of the AvantGarde crank handle
upwards and bend and turn the crank. The safety seal serves as a visual indicator that the crank should only be operated in an emergency.

Recommissioning

No measures are necessary when recommissioning both SOLIDline motors. If the curtain was opened with the crank handle, the crank handle should be turned a quarter turn in the opposite direction before recommissioning
Turn in the opposite direction to relieve the gearbox and prevent the crank from turning during motor operation.

Installation

The freewheel with shaft driver is fitted to the motor. The system is installed as usual, except that the gearbox is fitted instead of the counter bearing and the roller capsule.
If a specific direction of crank rotation is required, the gearbox can be rotated by 180° axially. The shaft length/hanging width must not be less than 750 mm.

RESCUE-R - choosing the right kit or module solution