Motor control unit JU-G1 for Veltrup

Function

Individual control is carried out by the local control point. The MS-G2 can also be used to control motors with two limit switches for the lower end position.
With central control, the local control point is disabled and the corresponding central command is executed. If the local switch is left engaged,
the local control command becomes effective again after the central command has ended.
By linking the load contacts accordingly, the "UP" command is always executed when "UP" and "DOWN" are activated at the same time.
Note:
The specified switchover pause must be observed for external control!

• Basic device for dead man's control with load switching unit for one shutter motor
• Suitable for individual and centralized control
• Control for decentralized and centralized arrangement
• Control voltage 24V DC low voltage
• Local control point as standard blind switch/button
• Equal priority switching of several motor controls possible via a common control point
• Control groups can be set up with any command hierarchy (group, floor, façade)
• Can be retrofitted with plug-in "JU-Zxx" function module for various operating functions