Description
The universal operator with emergency operation
The SP-NHK operator can be used in conjunction with all hangings. The end positions are set manually on the motor head. In addition, operation is possible with an emergency hand crank
for example in an emergency in the event of a power failure. The end positions are maintained after manual operation. Parallel connection of several SP-NHK drives is not permitted!
If two or more SP-NHK drives are controlled simultaneously via a switch or a timer, an isolating relay must be used.
Available in BR 2 (from SW 50/shaft Ø 50 mm) up to and including 20 Nm. Adapters must be ordered separately for BR 2 drives.
Spherical plain bearing mount 7 mm hexagonal or 6 mm square.
The SP-NHK operator can be used in conjunction with all hangings. The end positions are set manually on the motor head. In addition, operation is possible with an emergency hand crank
for example in an emergency in the event of a power failure. The end positions are maintained after manual operation. Parallel connection of several SP-NHK drives is not permitted!
If two or more SP-NHK drives are controlled simultaneously via a switch or a timer, an isolating relay must be used.
Available in BR 2 (from SW 50/shaft Ø 50 mm) up to and including 20 Nm. Adapters must be ordered separately for BR 2 drives.
Spherical plain bearing mount 7 mm hexagonal or 6 mm square.
Specifications
| Article number | Designation | Nm | Rpm | L1 | L2 | ØC | Power in watts |
| 149 0149 01 | SP 2/7-NHK | 7 | 17 | 567 | 542.5 | 50 | 95 |
| 149 0149 02 | SP 10/7-NHK | 10 | 17 | 567 | 542,5 | 50 | 105 |
| 149 0149 03 | SP 15/7-NHK | 15 | 17 | 567 | 542,5 | 50 | 152 |
| 149 0149 04 | SP 20/7-NHK | 20 | 17 | 567 | 542,5 | 50 | 172 |
- Operating voltage: 230V
- End position adjustment: Mechanical
- Blocking detection: without blocking detection
- Obstacle detection: without obstacle detection
- Operating mode: Emergency hand crankSwitches
- Design: Ø50mm
- Product group: Selve tubular motors
- Strength: 10Nm15Nm20Nm7Nm
- Revolutions/min.: 17 rpm.
- Parallel connection: not suitable for parallel connection
- Additional Description: with mechanical limit switches
PDF
Instructions
