AUTOMATIC DETECTION OF THE UPPER AND LOWER END POSITIONS
...the roller shutter must be equipped with fixed shaft connectors and stoppers
AUTO-ADAPTIVE RELIEF OF THE END POSITIONS (TOP AND BOTTOM)
...adapts to the roller shutter - PATENTED SYSTEM
STOPPING IN THE EVENT OF AN OBSTACLE
...the motor stops during closing if it detects an obstacle
FREEZE DETECTION
...the motor stops if the roller shutter is blocked by frost in the guide rail or the bottom slat is locked
PERMANENT READJUSTMENT OF THE END POSITIONS
...thanks to the self-learning function and constant checking of the upper and lower end positions. The adjustment is based on deviations in the roller shutter length over time
Important note:
Fixed shaft connectors and stoppers or Angled end rail required.
Specifications
| >Article number | Designation | Nm | rpm | L1 | L2 | L3 | ØC | Powerin watts |
| 149 0019 01 | T5 Auto+ - 06/17 W60 | 6 | 17 | 521 | 498 | 485 | 50 | 90 |
| 149 0019 02 | T5 Auto+ - 10/17 W60 | 10 | 17 | 521 | 498 | 485 | 50 | 120 |
| 149 0019 03 | T5 Auto+ - 15/17 W60 | 15 | 17 | 541 | 518 | 505 | 50 | 140 |
| 149 0019 04 | T5 Auto+ - 20/17 W60 | 20 | 17 | 695 | 672 | 659 | 50 | 160 |
| 149 0019 05 | T5 Auto - 25/17 W60 | 25 | 17 | 695 | 672 | 659 | 50 | 170 |
| 149 0019 06 | T5 Auto - 35/17 W60 | 35 | 17 | 695 | 672 | 659 | 50 | 240 |
- Operating voltage: 230V
- End position adjustment: Electronic
- Output drive: 60mm 8-edge
- Blocking detection: with blocking detection
- Obstacle detection: with obstacle detection
- Operating mode: Switches
- Design: Ø50mm
- Product group: Simu tubular motors
- Strength: 10Nm15Nm20Nm25Nm35Nm6Nm
- Revolutions/min.: 17 rpm.
- Parallel connection: suitable for parallel connection
- Additional Description: with electronic limit switches
