Thermax 8 / 80 M6

The fischer TherMax 8 spacer mounting system is a solution for fixing in the external wall without thermal bridges in ETICS. The hanger bolt with the glass fiber-reinforced cone cuts through the plaster into the insulating material. During installation, the hanger bolt is screwed into the UX universal plug, anchoring it securely in the building material. The anti-cold cone on the head of the hanger bolt interrupts the thermal bridge and absorbs the external fixing. The TherMax fixes light loads such as lights, letterboxes or lightning rods in concrete, aerated concrete and masonry made of perforated and solid brick.

• The TherMax 8 is suitable for push-fit installation.
  
  
• The self-tapping, glass-fiber reinforced cone cuts directly through the plaster into the insulating material during installation.
  
  
• The anti-cold cone reliably interrupts the thermal bridge.
  
  
• Installation is carried out without any special tools.
  
  
• When using in wood without dowels, the wood (see footnote under load table) and the plaster must be pre-drilled: TherMax 8:
  d0 = 14 mm, h0 = 50 mm.
  
  
• The range offers connection options using metric screws M6, sheet metal screws 6.3 mm, chipboard screws
  6.0 mm or chipboard screws 4.5-5.5 mm when using an SX 5 plug.

Advantages:

• The spacer installation allows the attachment part to be adjusted for exact positioning, whereby pressure points or damage to the ETICS can be avoided
  Damage to the ETICS is avoided.
  
  
• The plastic cone interrupts the thermal bridge between the attachment part and the inner fastening and offers an energy-optimized fastening
  energy-optimized fastening.
  
  
• The glass fiber-reinforced plastic cone mills itself positively into the ETICS and enables simple and quick installation without special tools
  quick installation without special tools.
  
  
• The combination of the TherMax 8 with the UX universal anchor anchors securely in the substrate.
  
  
• Without the UX anchor, direct installation in wooden substrates is also possible after pre-drilling.