Wireless wind and sun sensor Somfy type "Soliris RTS LED"

  • with automatic rain, wind and sun control
  • Automatic (wind and brightness-dependent) radio control of one or more drives
  • with 220- 240V operating voltage
  • with rain sensor connection and 5m cable
  • with "RTS" radio protocol

Commission:
Prices visible after login
1 In stock
: 24.12.2024 - 28.12.2024 (DE - int. shipments may differ)
Description

The sensor enables automatic (wind-, brightness- or rain-dependent) control of one or more RTS drives
by radio. If the set threshold value for wind is exceeded, the blind is raised or retracted for protection
Rain in combination with the Ondeis rain sensor. if the light intensity persistently exceeds the set threshold value, the blind automatically moves to the sun protection position.

Automatic wind control:
The Soliris Sensor RTS continuously measures the current wind speed. If the set threshold value for wind is exceeded, the awning / external venetian blind is raised or lowered for protection
retracted or raised for protection. If the wind speed falls below the set threshold value, the automatic sun function is released again after 12 minutes.

Automatic sun control**:
The Soliris Sensor RTS continuously measures the current light intensity. If the set threshold value for sun is continuously exceeded, the awning / external venetian blind is extended or retracted after 2 min.
extended or retracted. If it is continuously undershot, the awning/blind is retracted or raised with a delay of 15-30 minutes. The longer the delay time, the higher the delay time,
the more frequently sun and shade alternate. This avoids frequent movements. Can be used with Somfy radio drives and Somfy radio receivers

** Depending on the receiver

Installation:
The wind/sun sensor must be installed where the wind sensor can measure the wind and the sun sensor can measure the sunlight without being influenced by it

  • Measurement of wind speed and sun intensity via combined wind/sun sensor
  • Automatic solar control can be switched on and off with Telis Soliris RTS
  • LED display when wind or sun threshold value is exceeded
  • Wireless communication to the radio drive or radio receiver
  • Simple programming via a button on the sensor
  • Simple setting of the wind and brightness threshold value on the sensor
  • Demo mode for time-saving function testing
  • Only requires a 230 V connection

Wireless wind and sun sensor Somfy type "Soliris RTS...

1779
Rain sensor Somfy type "Ondeis 230V"
Rain sensor Somfy type "Ondeis 230V"
Prices visible after login

Loading ...